Yonkers Roof Pros provides professional metal roofing in Yonkers, NY for residential and commercial properties across southwest Westchester. Metal is a real option here, but not the metal in the advertisements. The exposed-fastener corrugated panel that fills the internet needs a genuinely steep slope, and the shallow decks that dominate this city are not it. Slope, not taste, is what rules it out.
Slope decides everything. A snap-together standing seam with lapped ends is a steep-roof product. A mechanically seamed panel with sealant in the seam is hydrostatic, holds at a quarter inch of fall per foot, and is the only metal that belongs on a shallow deck. Getting that pair confused is how a metal roof leaks in its second winter. We write down which of the two we are quoting, in those words.
There is a code path worth knowing. The reroofing section allows a complete and separate system, a structural standing seam that carries its loads into the building's frame instead of resting on what is already there, to go over an existing covering without tearing it off. On the right building that removes an entire tear-off from the budget. That clause is worth reading before somebody talks you out of it.
The right building is the catch. It needs framing that can take a new bearing line, an existing assembly that is dry, and enough height at the parapet to terminate the panel properly. We check all three with a core and a look at the top-floor ceiling framing before the option is ever priced, and often it does not survive that check. When it does not survive, we say so on the first visit.
Small metal work is where this trade earns its keep in Yonkers, and it is what we do most. Soldered pan roofs over bay windows and entry porches, terne-coated stainless on a shallow projection, standing seam on a mansard's steep face with a membrane deck behind the ridge. Those jobs are measured in feet, not squares.
We steer owners away from a full metal roof far more often than toward one. On a two-family with a small visible face and a large flat deck, the metal buys you a look on twenty per cent of the roof at several times the price of the covering the other eighty per cent needs. Spend it on the deck. It is a good answer to a question most of these buildings are not asking.
Our licensed and insured team brings the right materials and equipment to every job — cast-iron drain bowls with replacement clamping rings, tapered polyisocyanurate laid to a quarter-inch board layout, lead-lined through-wall scupper sleeves, torch-applied SBS cap sheet turned up the parapet, gravel-stop edge metal set in two courses of flashing cement, sheet-metal coping caps with concealed splice plates — and backs the work with a written workmanship warranty. We serve Yonkers and nearby communities including Mount Vernon, Bronxville, Tuckahoe, Eastchester.
What We Handle
Everything our metal roofing in Yonkers covers
One crew, one point of contact, and the full range of metal roofing work in Yonkers, NY. If it is on this list we do it in house rather than handing it to a subcontractor:
- metal roofing yonkers
- standing seam metal roof westchester
- mechanically seamed metal panel
- metal roof over existing roof
- low slope metal roofing
- metal roof mansard
- snap lock standing seam
- metal roofing cost yonkers ny
- aluminum standing seam roof
- metal roof structural system
- bay window metal roof
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Yonkers services.
Materials, equipment and how we do metal roofing
The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with cast-iron drain bowls with replacement clamping rings, tapered polyisocyanurate laid to a quarter-inch board layout, lead-lined through-wall scupper sleeves, torch-applied SBS cap sheet turned up the parapet, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Yonkers job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in southwest Westchester means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do metal roofing outside Yonkers
Yonkers Roof Pros covers Yonkers and the surrounding communities of southwest Westchester. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Metal Roofing in Mount Vernon, NY — Westchester County, population 73,893
- Metal Roofing in Bronxville, NY — Westchester County, population 6,656
- Metal Roofing in Tuckahoe, NY — Westchester County, population 7,084
- Metal Roofing in Eastchester, NY — Westchester County, population 20,901
- Metal Roofing in Scarsdale, NY — Westchester County, population 18,253
- Metal Roofing in Hartsdale, NY — Westchester County, population 3,377
Start on the Yonkers Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Yonkers Chooses Yonkers Roof Pros
- ✓We settle one question before any other: does this roof still drain. The city's own re-roofing permit hangs two code allowances on that word, and your price hangs on it too.
- ✓A hose test on the low corner with the chalk line and the drain-down time written onto the estimate, rather than a slope guessed at from the sidewalk.
- ✓The drain bowl, clamping ring, strainer and the leader inside the wall chase are itemized apart from the membrane, because they fail on a completely different clock.
- ✓Where the street face is shingle and the deck behind it is membrane, you get two systems, two prices and two service lives, never one figure for the address.
The standards behind metal roofing
Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Yonkers follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every metal roofing project in Yonkers gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Yonkers, or request a quote and we'll get right back to you.